Table of Contents
Advertisement
1. Getting started
1) Connect VisualTable and run VisualTable program.
① Turn on your PC power, and check whether the USB cable, power cable and power adapter of the
VisualTable are all properly connected to your PC. After you have reconnected the USB cable wait
30 seconds and start the program afterwards.
② Double click the "VisualTable" execute icon on the PC screen or in the start menu in the lower-left
corner of the PC screen.
③ Put your book, binding or paper, to be viewed on the top of VisualTable with its visible side facing
down.
④ Turn on power by pressing the power button on the button panel at the front of VisualTable.
⑤ Push the LEFT or RIGHT button to capture pages.
⑥ If the projected image does not appear, check "Camera options" in "Custom Setting" in the below.
2) Custom Setting: Camera options
III_Operating VisualTable
VisualTable
- 13 -
III_Operating VisualTable
Advertisement
Table of Contents
Need help?
Do you have a question about the VisualTable RF-4730964 and is the answer not in the manual?