Assa Abloy Corbin Russwin IN100 Aperio ED5200N Series Installation Instructions Manual page 22

ED5600N Series Exit Devices For
9M100 IN100 Series Trim
4. Battery Installation
a. Place (6) "AA" alkaline batteries in the compartment, being
careful to align polarity properly (Fig. 18).
b. After batteries are installed, there is a slight delay; then red and
green flash, audible "beep" and lock motor will cycle.
5. Inside Cover Installation
a. Assemble cover by hooking top edge on inside
mounting plate.
b. Carefully press bottom of cover toward door without
pinching any wires.
c. Secure cover utilizing security allen wrench.
Copyright © 2018 Corbin Russwin, Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the
express written permission of Corbin Russwin, Inc. is prohibited.
7) IN100 Installation Instructions (Continued)
22
Inside of Door
Inside
Cover
Security
Allen Screw