Assa Abloy Corbin Russwin IN100 Aperio ED5200N Series Installation Instructions Manual page 15

ED5600N Series Exit Devices For
9M100 IN100 Series Trim
6) Mortise Exit Installation Instructions (Continued)
5. Install Exit Device:
a. Seat device against door being careful to align vertical trim tailpiece to engage with
cross hole of device cam - see Figure 12a.
b. Fasten device to trim assembly using (2) 1/4-20 pan head screws (Fig. 12a).
c. Follow instructions packed with device to secure device to door.
d. Tighten all (4) screws (Fig. 12b).
Fig. 12a
Copyright © 2018 Corbin Russwin, Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the
express written permission of Corbin Russwin, Inc. is prohibited.
Inside Face of Door
15
Fig. 12b
Tighten
securely