Table of Contents
Advertisement
3
Hardware Installation
Follow the steps below to install the Network Camera to the ceiling:
1. Detach the Decoration Ring from the Hard Ceiling Mount Bracket.
2. Align the three holes on the Mount Bracket, mark the screws locations on the ceiling.
3. Drill three pilot holes into the ceilling and hammer the plastic anchors into the holes.
4. Fix the Mount Bracket with three screws.
1
2
3
EN - 5
4
Advertisement
Table of Contents
Need help?
Do you have a question about the 4X-SD8111 and is the answer not in the manual?