HDS-7150/7100
2-6. Removal of Parts on the Front Side
2-6. Removal of Parts on the Front Side
(1) Remove the front panel. (Refer to Section 2-5.)
(2) Remove the ten screws on the two board retainers and the one board holder.
(3) Disconnect the two connectors (CN2) from the CN-1700 boards.
(4) Remove the eight screws on the two fan assemblies.
Board retainer
PWH4 x 8
CN-1700 board
CN2
Fan assembly
PWH4 x 8
CN-1700 board
PWH4 x 8
Board holder
CN2
Fan assembly
PWH4 x 8
PWH4 x 8
Board retainer
PWH4 x 8
PWH4 x 8
To install the parts on the front side, carry out in the reverse order of the steps (1) through (4).
2-15
HDS-7150/7100