Saving Set-Up Data To Nonvolatile Memory - Sony HDS-7150 Installation Manual

10-4. Saving Set-up Data to Nonvolatile Memory

(1) Press the buttons above the control panel in the following sequence.
[SETUP] → [F2] (SYSTEM) → [F4] (SAVE)
The system save menu is displayed.
(2) Press [F2] (SETUP).
The display changes as follows.
(3) Press [F5] (YES).
This completes all the settings. Hereafter, when the main power is turned on, the set-up data saved in the
nonvolatile memory is automatically invoked. If required, the set-up data can be saved in the optional
memory pack (BZS-2090A). For details, refer to the User's Guide supplied with the HZS-7060.
HDS-7150/7100
SYSTM
SETUP DEFALT
SAVE
F1 F2 F3
SYSTM Do you want to
SAVE
F1 F2 F3
F4 F5 F6
save the SETUP?
YES NO
F4 F5 F6
10-4. Saving Set-up Data to Nonvolatile Memory
HDS-7100
10-21