Advertisement
900TS0X_0R
4. Select data to be deleted
In the 'Disk file operations' window, check the 'Historical data', 'Alarm data' and 'Log data' checkboxes.
Then press the 'Delete data' (marked green in Fig. 3) button and confirm you want to delete the selected
data (in the confirmation window that pops up).
Fig. 3
The data stored in the 900TS memory will now be deleted.
Please wait until the progress window (Fig. 4) closes automatically (and return to the 'Disk file operations'
window). Then proceed with step 5.
Fig. 4
5. Restart the touchscreen
In the 'Disk file operations' window (Fig. 3), press 'Back' to return to the 'Start properties' window.
Press the 'Restart' button to restart and boot the touchscreen normally.
NOTE
After completing this procedure, you can restore user-setting such as unit selection, the interface
language, Modbus selection (if applicable to your project, also see the 900TS manual).
ebm-papst Heating Systems BV
900TS_Programming and Troubleshooting.doc
Programming and troubleshooting
ebm-papst – Commercial Plus
x
x
x
2019/04/11
Page 8 of 14
Advertisement
