Advertisement
900TS0X_0R
8. After completion, press the touchscreen to finalize the process (Fig. 6) and restore the system:
Fig.6
After the touchscreen has restarted, a progress-window will show (Fig. 7).
Once Chinese text appears at the bottom of the progress-window (marked green in Fig. 7) the touchscreen
will beep continuously:
Fig.7
9. Power OFF the touchscreen and remove the USB flash drive from the USB1 port.
The process of recovering the memory is now complete.
NOTE
After you have completed this procedure, ensure to program the desired touchscreen firmware from
your Project folder on the Web Portal (see Chapter 1).
ebm-papst Heating Systems BV
900TS_Programming and Troubleshooting.doc
Programming and troubleshooting
ebm-papst – Commercial Plus
2019/04/11
Page 14 of 14
Advertisement
