Advertisement
900TS0X_0R
5.
Recover memory procedure
When a 900TS00_0R touchscreen is completely stuck and not responding anymore to any user input, even after a
reboot, the touchscreen can be recovered to factory state via the procedure described in this chapter.
NOTE
This procedure can only be performed on a 900TS00_0R touchscreen!
WARNING
Do not attempt to perform this procedure on a 900TS02_0R touchscreen!
The 900TS02_0R touchscreen cannot be recovered from the bricked state if this procedure is
performed on the device. For more information please contact ebm-papst.
Requirements
To recover the memory of a 900TS00_0R touchscreen the following items are required:
A USB flash drive (formatted according to the FAT-file system)
A 900TS00_0R Memory recovery software package.
900TS00_0R Memory recovery software package
A zip-file with the appropriate software (only suitable for 900TS00_0R) is provided by ebm-papst, which contains
the following files items:
ebm-papst Heating Systems BV
900TS_Programming and Troubleshooting.doc
Programming and troubleshooting
ebm-papst – Commercial Plus
2019/04/11
Page 11 of 14
Advertisement
