Advertisement
900TS0X_0R
7. Then press the button on the upper left side (Fig. 5) to start the firmware update (Fig. 6):
Fig. 5
Fig. 6
After the firmware has successfully been updated, the touchscreen will reboot automatically.
During rebooting unplug the USB stick from the touchscreen, otherwise the firmware-update process will
start again (the window displayed at Step 4 - Fig. 2 will appear again).
NOTE
If an error appears on screen during the update-process, power OFF the touchscreen, wait a few
seconds and power it back ON to retry. If the problem re-occurs please contact ebm-papst.
ebm-papst Heating Systems BV
900TS_Programming and Troubleshooting.doc
Programming and troubleshooting
ebm-papst – Commercial Plus
2019/04/11
Page 5 of 14
Advertisement
