ZIMO MXULFA Instruction Manual
  1. Manuals
  2. Brands
  3. ZIMO Manuals
  4. Computer Hardware
  5. MXULFA
  6. Instruction manual

ZIMO MXULFA Instruction Manual

Decoder update and sound loading device
Hide thumbs Also See for MXULFA:
Table of Contents

Advertisement

Quick Links

Decoder-Update-and-Sound-Loading-device
INSTRUCTION MANUAL
MXULFA
Decoder Update and Sound loading device
MXULFA
and:
t- and Connection Board
Tes
As well as
MXULFA
, Test and Connection boards
MXTAPS, MXTAPV
MSTAPK, MSTAPG
MXTAPS, -V, MSTAPK, -G
MXTAPK
1.
MXULFA Features ............................................................................................................................ 2
2.
Technical Data .................................................................................................................................. 2
3.
The USB stick for use with MXULFA................................................................................................ 2
4.
Switching on the MXULFA and connecting a decoder .................................................................... 2
5.
Self-update of the MXULF or MXULFA ............................................................................................ 4
6.
Decoder software and sound from USB stick .................................................................................. 4
7.
Decoder software and sound from computer ................................................................................... 6
8.
Synchronous update for accessory decoders MX820, MX821 ....................................................... 7
9.
Driving operation with MXULFA ....................................................................................................... 7
10.
Programming/ reading CVs SERV PROG / OP PROG .................................................................. 8
11.
Read / program load code ................................................................................................................ 8
12.
Decoder-connection board MXTAPS / V .......................................................................................... 9
13.
the decoder connection boards MSTAPK resp. -G ........................................................................ 11
Annex: Declaration of Conformity and Warranty ....................................................................................... 13
.
1
Page
EDITIONS:
First delivery in December 2011 - 2011 12 20
until April 2012
SW add-on 2 -- SW version 0.22 - 2012 11 10
SW add-on 3 -- SW version 0.32 - 2012 12 20
SW add-on 4 -- SW version 0.40 - 2013 03 12
SW add-on 5 -- SW version 0.50 - 2013 08 20
0.56.03 - 2013 11 20
2014 03 13
Dortmund 2014 edition 2014 04 06
SW version 0.61 --- 2014 05 20
2014 10 10
2015 01 22
SW add-on 6 - 2015 07 05
2015 08 24
2015 11 25
2016 03 11
SW add-on 0.70 - 2016 08 01
2016 08 18
2016 09 01
SW version 0.85 - 2020 01 20
Addition MS - 2020 02 20
2020 06 01
2020 07 30
2022 06 30

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MXULFA and is the answer not in the manual?

Questions and answers

Related Manuals for ZIMO MXULFA

Summary of Contents for ZIMO MXULFA

  • Page 1: Table Of Contents

    Technical Data ..........................2 MXULFA The USB stick for use with MXULFA....................2 Switching on the MXULFA and connecting a decoder ..............2 Self-update of the MXULF or MXULFA .................... 4 Decoder software and sound from USB stick .................. 4 and: Decoder software and sound from computer ...................

  • Page 2: Mxulfa Features

    USB stick or from computer (programs ZSP, ZCS), If a USB stick does not (or no longer) work with MXULFA (this will be more often the case with third-party optionally via rail (decoder built into locomotive) or via SUSI interface (1/10 time requirement).
  • Page 3 MXULFA MXTAPS, -V, MSTAPK, -G Page 3 Decoder-Update-and-Sound-Loading-device , Test and Connection boards...

  • Page 4: Self-Update Of The Mxulf Or Mxulfa

    Update & Sound - Update MS decoder root directory of the USB stick. For this you can use the ZIMO USB stick enclosed with the device decoder, unpack it and save it in the root directory of the USB stick (.zsu file).
  • Page 5 → LED „Power“ green. vehicle, only decoder) • Connect connection board (MXTAP.. or MSTAP..) by SUSI cable (i.e. SUSI connector on MXULFA to OR: Connect MSTAP.. or MXTAP.. board (with decoder SUSI connector on MSTAP.. or MXTAP.. board), but NOT "rail".

  • Page 6: Decoder Software And Sound From Computer

    MXULFA itself (but on the computer), which therefore only shows the number of received and sent data on the display. So this is also about the "standard procedures" for single ZIMO decoders of the generations MX...

  • Page 7: Synchronous Update For Accessory Decoders Mx820, Mx821

    This method removes a problem especially known with large-scale layouts: decoders built-in to turnout casings (e.g. LGB) have to be removed and connected individually to a decoder-update-device to load an The MXULFA is also a small command station with max. 2A This allows test drives to be completed after update.

  • Page 8: Programming/ Reading Cvs Serv Prog / Op Prog

    SERV PROG / OP PROG The MXULFA not only is a module too update ZIMO decoders, but also to read-out and program CVs. The load code for sound projects is one of ZIMOs specialties, which originates in a number of sound pro- The MXULFA provides two ways of communication with the decoder: viders.

  • Page 9: Decoder-Connection Board Mxtaps / V

    NOTE: The supply via When testing, ZIMO and other products can be mixed on both sides. SUSI sound load is only possible with SUSI cable is sufficient for ZIMO decoders.
  • Page 10 PC and MXULF. MXTAPV (not MXTAPS) with connected large-scale decoder MX696, connected to MXULFA; on the MXULFA sound loading was just started (according to the display), the sound project is loaded from a flash drive MXTAPV with decoder MX645P22 (PluX22), connected to MXULFA: ATTENTION: To load sound into large-scale sound decoders, the SUSI interface (“SUSI”...

  • Page 11: The Decoder Connection Boards Mstapk Resp. -G

    (functionally similar) "old" MXTAPS and MXTAPV. The ZIMO decoder test and connection boards of the MS series were developed in connection with the MS sound decoders, in order to support their possibilities fully (therefore e.g. two loudspeakers for large rail- road decoders and PluX-26 decoders, interfaces for the new gauge 0 decoders.
  • Page 12 Typical applications MSTAPG together with MXULFA: MSTAPG with attached large scale railroad sound decoder MS990 (ZIMO interface for sizes G, 1), connected to MXULFA: sound loading has just been started at MXULFA (according to the display), the sound project comes from the USB stick.

  • Page 13: Annex: Declaration Of Conformity And Warranty

    The warranty does not apply: - with normal wear and tear - if devices are not used for the purpose intended by ZIMO Elektronik GmbH and in accordance with its operating instructions - in case of modifications or alterations not performed by ZIMO Elektronik GmbH.

This manual is also suitable for:

MxtapsMxtaps-vMstapkMstapk-g

Table of Contents