Subscribe to Our Youtube Channel
Related Manuals for Spektrum NX10
Summary of Contents for Spektrum NX10
- Page 1 NX10 10-Channel 2.4GHz DSMX Aircraft System ® ® Instruction Manual Bedienungsanleitung Manuel d’utilisation Manuale di Istruzioni...
- Page 2 WARNING AGAINST COUNTERFEIT PRODUCTS: Always purchase from a Horizon Hobby, LLC authorized dealer to ensure authentic high-quality Spektrum product. Horizon Hobby, LLC disclaims all support and warranty with regards, but not limited to, compatibility and perform ance of counterfeit products or products claiming compatibility with DSM or Spektrum technology.
- Page 3 • Always monitor the charging area and have a fire extinguisher available at all times. BEFORE USING YOUR TRANSMITTER Before going any further, visit the Spektrum Community website at www.spektrumrc.com to register your transmitter and download the latest Spektrum AirWare firmware updates. A registration reminder screen occasionally appears until you ™...
-
Page 4: Table Of Contents
Table of Contents ................ 4 Exporting the Serial Number to the Memory card ......28 Charging the Lithium Ion Battery Pack ........5 Locating the Transmitter Spektrum AirWare Software Version ..28 Updating with WiFi ..............5 Function List ................29 Transmitter Functions .............. -
Page 5: Charging The Lithium Ion Battery Pack
SpektrumRC.com first on your PC, Mac, or mobile device before you can connect with your NX10 1. Power ON your NX10 and enter the Function menu, Scroll to the bottom to access the System menu. 2. Scroll down and select Check For Updates. The NX10 will search for WiFi networks in range and display the options for you to connect with. -
Page 6: Transmitter Functions
40 Antenna (Mode 1) 10 Mode Change Screw 16 Neck Strap Mount Throttle/Rudder Stick 17 WiFi Indicator (Mode 2) 18 Scroll wheel Elevator/Aileron Stick 19 Charge Indicator (Mode 3) Throttle/Aileron Stick 20 LCD (Mode 4) SPEKTRUM NX10 • TRANSMITTER INSTRUCTION MANUAL... -
Page 7: Powering The Nx10 On And Off
6 Memory Card Opening 12 Antenna Rotation Tension POWERING THE NX10 ON AND OFF 1. Press and hold the Spektrum Logo for several seconds to turn ON the NX10. 2. Press and hold the power button for about 4 seconds to power OFF the NX10. -
Page 8: Main Screen
To select a switch, toggle the switch you wish to select. Verify the switch selection is now displayed as desired. When correct, press the scroll wheel to select this switch and complete the switch selection. SPEKTRUM NX10 • TRANSMITTER INSTRUCTION MANUAL... -
Page 9: Internal Memory
• Install/Update sound files 2. Power ON the transmitter, enter the system menu -> USB • Back up models for safe keeping storage, select Access Internal Storage, the NX10 will connect • Import/Export Color Palettes to your PC. 3. Complete your file transfer(s). -
Page 10: Memory Card Functions
Update Spektrum AirWare Software ™ NOTICE: The orange LED Spektrum bars flash and a status Manually Installing Spektrum AirWare Software Updates bar appears on the screen when Spektrum AirWare software 1. Save the desired Spektrum AirWare version to an Memory updates are installing. -
Page 11: Model Type Programming Guide
About/Regulatory About/Regulatory USB Settings Transfer SD Card Transfer SD Card Transfer SD Card About/Regulatory About/Regulatory About/Regulatory System Setup List: Function List: SPEKTRUM NX10 • TRANSMITTER INSTRUCTION MANUAL Model Select Control Setup Model Type D/R and Expo Model Name Motor Cut... -
Page 12: System Setup
2. Select Yes and press the scroll wheel to confirm the model type. All data will be reset. Selecting No will exit the Confirm Model Type screen and return to the Model Type screen. SPEKTRUM NX10 • TRANSMITTER INSTRUCTION MANUAL... -
Page 13: Model Name
5 (including Throttle Hold) switches can be used to access all of the flight modes available. SAIL Below is an example of 5 flight modes, you can configure up to MULTI 10 flight modes with the NX10: Number of Flight Modes Switch 1... -
Page 14: Flight Mode Setup
The box around the current input selection flashes. 3. Scroll left or right to select the desired control stick or switch. 4. Press the scroll wheel to save the selection. SPEKTRUM NX10 • TRANSMITTER INSTRUCTION MANUAL... -
Page 15: Trim Setup
In a few instances, you can reassign a trim to a different location. Aircraft Model Type Throttle • Throttle Digital trim button (default) Left Lever Right Lever Throttle Trim Type • Common • Flight Mode SPEKTRUM NX10 • TRANSMITTER INSTRUCTION MANUAL... -
Page 16: Model Utilities
1. To delete a model, highlight the model listed. Press to select, then roll to the model name. Press the scroll wheel to select. 2. Select DELETE to delete the model. SPEKTRUM NX10 • TRANSMITTER INSTRUCTION MANUAL... -
Page 17: Copy Model
Return the switch or control stick to the safe position to silence the alarm. For safety reasons, the default throttle alarm activates if the throttle position is above 10%. SPEKTRUM NX10 • TRANSMITTER INSTRUCTION MANUAL... -
Page 18: Telemetry
Installing the optional telemetry module and sensors enables the You can also enable Data Logging to save a telemetry file on the display of aircraft performance data on the transmitter screen. Memory card and view the data in the Spektrum STi mobile ™... -
Page 19: Preflight Setup
SRXL2 as well as the CRFS protocols for compatibility External Power (9.5v) with the TBS Cross Fire and Cross Fire 2. In addition, the NX10 is Select On when using an external power source for the external engineered to deliver a 9.5V power supply for external devices. -
Page 20: Trainer
This mode is available for connecting a head tracking system to the NX10 for FPV use. This option is covered further in the Headtracking FPV Setup section. SPEKTRUM NX10 • TRANSMITTER INSTRUCTION MANUAL... -
Page 21: Instructor Transmitter Configuration
Binding the NX10 wireless trainer feature as an instructor 2. Long press on BIND. transmitter is not the same as binding the NX10 to an aircraft. The 3. Place the student transmitter in normal bind mode. NX10 has a built-in receiver dedicated to the wireless trainer. The 4. -
Page 22: Center Tone
Choose Select/Add Category to enable Add Sound, Remove Sounds and Sort Sounds. Palette Utilities The colors on the NX10 may be customized as you wish. Select from the pre-defined color options listed under Global Customized, or select Personalize to create your own RGB color scheme. -
Page 23: Brightness
Battery Alarm The Battery Alarm is set to LiIon battery type for the NX10 and cannot be changed. The alarm activates when the battery reaches the low voltage limit. To change the battery voltage trigger point for the alarm: 1. -
Page 24: Extra Settings
(select from Default, 4, 6, 7, 8, 9, or 10 channels) Set Date/Time When you select this option another screen is opened. Set the time and choose the options to suit your needs. SPEKTRUM NX10 • TRANSMITTER INSTRUCTION MANUAL... -
Page 25: Power Sounds
First start an account at SpektrumRC.com first on your PC, Mac, or mobile device. 1. Select WiFi Utilities. The NX10 will search for WiFi networks in range and display the options for you to connect with. 2. Select your WiFi connection. Load the SSID and password for connection and select Connect. -
Page 26: Transfer Memory Card
Select the internal memory location to save to the memory bank 7. Select Import to confirm overwriting the current model file. The built into the NX10. Select the external memory location to save to transmitter activates the new model file and the Main Screen the micro Memory card slot. -
Page 27: Importing/Exporting Color Palettes
Update AirWare NOTICE: The orange LED Spektrum bars flash and a status bar Automatically Installing Airware Updates With Memory Card appears on the screen when AirWare updates are installing. -
Page 28: About / Regulatory
The Serial Number screen displays the transmitter serial number and Spektrum AirWare software version. Reference the Serial Number screen any time you need to register your transmitter or update the Spektrum AirWare software from the Spektrum Community website. Exporting the Serial Number to the Memory card... -
Page 29: Function List
Select YES to reverse the channel. A second screen appears, the model responds properly. reminding you to bind your transmitter and receiver. CAUTION: After adjusting servos, always rebind the transmitter and receiver to set the failsafe position. SPEKTRUM NX10 • TRANSMITTER INSTRUCTION MANUAL... -
Page 30: Speed
On (Differential is always on) or assign the differential to once to change the value. a switch position. 4. Press the scroll wheel again to save the selection. 2. Press the scroll wheel a second time to save the selection. SPEKTRUM NX10 • TRANSMITTER INSTRUCTION MANUAL... -
Page 31: Throttle Cut (Acro And Heli Types Only)
Channel: Inhibit on the bottom of the screen and press the roller. This will take you to the Channel Input Config screen to assign a channel to a switch. 7. Repeat 2 through 6 for all switches desired. SPEKTRUM NX10 • TRANSMITTER INSTRUCTION MANUAL... -
Page 32: Mixing
Curve (Page) changing mixes. The Curve value corresponds to each page of values assigned to a switch position. Leave the Curve value matching the highlighted box below the switch position for a basic configuration. SPEKTRUM NX10 • TRANSMITTER INSTRUCTION MANUAL... -
Page 33: Curve Mix
2. In the second Sequencer screen, assign a switch to the example, applying your assigned dual rates and exponential when the sequence. We recommend using a 2-position switch. landing gear deploys and the flight mode changes. SPEKTRUM NX10 • TRANSMITTER INSTRUCTION MANUAL... -
Page 34: Range Test
Range Test mode. 4. If control issues occur, contact the appropriate Horizon Product Support office for assistance. 5. If performing a range test while a telemetry module is active, the display will show flight log data. SPEKTRUM NX10 • TRANSMITTER INSTRUCTION MANUAL... -
Page 35: Timer
Timer The NX10 Timer function allows you to program a countdown timer or stop watch (count up timer) to display on the main screen. An alarm sounds when the programmed time is reached. You can program the timer to start using the assigned switch position or automatically when throttle is raised above a programmed position. -
Page 36: Audio Events
SEND to make the change. Function Bar The Function Bar on the NX10 offers 2 features, a Ticker Tape to show telemetry values and My List which allows quick access to menu items chosen that are frequently used. -
Page 37: Bind
This is useful to verify programming functions, trim settings, mix directions, etc. The numeric value is directly relative to the travel adjust and mix values (e.g. 100% travel adjust equals 100% value in the Monitor). SPEKTRUM NX10 • TRANSMITTER INSTRUCTION MANUAL... - Page 38 Only available in Helicopter Type. See HELI (Helicopter) section for set up. Motor Cut Only available in Multicopter Type. See MULTI (Multicopter) section for set up. Motor Curve Only available in Multicopter Type. See MULTI (Multicopter) section for set up. SPEKTRUM NX10 • TRANSMITTER INSTRUCTION MANUAL...
-
Page 39: Acro (Airplane)
If you want a pitch curve on an airplane, activate this function. You can only use two of these options due to the channel count limit of your NX10. Once these options are chosen, the related menus appear in the Function List. -
Page 40: Elevon Servo Control
• Add Aileron mixing if the aircraft rolls in knife edge flight Aileron to Rudder Use Aileron to Rudder mixing to overcome adverse yaw characteristics with certain types of aircraft (such as high-wing aircraft). SPEKTRUM NX10 • TRANSMITTER INSTRUCTION MANUAL... -
Page 41: Differential
Ad Pt. to add a point along the curve. select a different Curve (page) to store multiple sets of values for testing. SPEKTRUM NX10 • TRANSMITTER INSTRUCTION MANUAL... -
Page 42: Heli (Helicopter)
1. Select the Pitch Curve you wish to edit (N, 1 or 2). 2. Scroll right to select the points on the curve and edit the respective values. 3. Press the BACK button to save the Pitch Curves and return to the Function List. SPEKTRUM NX10 • TRANSMITTER INSTRUCTION MANUAL... -
Page 43: Swashplate
Move the programmed cyclic or rudder channel, noting the throttle position. The throttle position should increase. If the throttle decreases, then the opposite value (positive vs. negative) is needed. SPEKTRUM NX10 • TRANSMITTER INSTRUCTION MANUAL... -
Page 44: Sail (Sailplane)
Use the Sailplane Type Screen to select wing and tail types to match your sailplane model. Diagrams and setup names show on the transmitter screen to show the available setups. Refer to spektrumrc.com for more information about new NX10 Spektrum AirWare updates to support these options. Wing... -
Page 45: Sail Mixing
2. Press the scroll wheel a second time to save the selection. 3. Scroll to Diff: and press the scroll wheel once to change the value. 4. Press the scroll wheel again to save the selection. SPEKTRUM NX10 • TRANSMITTER INSTRUCTION MANUAL... -
Page 46: Multi (Multirotor)
Exponential affects control response sensitivity around center but has no affect on overall travel. Positive exponential decreases the sensitivity around the center of gimbal movement. SPEKTRUM NX10 • TRANSMITTER INSTRUCTION MANUAL... -
Page 47: Motor Cut
If you program multiple throttle curves and you wish to edit one of the curves, that curve must be active in the Motor Curve screen before you can make any changes. SPEKTRUM NX10 • TRANSMITTER INSTRUCTION MANUAL... -
Page 48: Physical Transmitter Adjustments
PHYSICAL TRANSMITTER ADJUSTMENTS The NX10 has all the physical transmitter adjustments located around the gimbal face of each gimbal. This arrangement allows for quick and easy adjustments with out taking the back cover off or removing any plugs to access adjustment screws. -
Page 49: Ratcheted Throttle - Smooth Throttle Adjustment
The antenna may also be folded for storage. Mode Conversion You can select transmitter modes 1, 2, 3 or 4 for the NX10. Centering screw Converting the mode requires both a programming and a mechanical change. -
Page 50: Troubleshooting Guide
The bind plug is not installed correctly in the bind port aircraft to the transmitter Flight battery/Transmitter battery charge is too low Replace/recharge batteries Transmitter is a NX10 EU version and receiver is The NX10 EU version is not compatible with DSM2... -
Page 51: 1-Year Limited Warranty
Horizon will hold non-compliant Product for a period of 60 Product has been started, you must contact your local distributor days from notification, after which it will be discarded. or Horizon directly. This will enable Horizon to better answer your 10-15 SPEKTRUM NX10 • TRANSMITTER INSTRUCTION MANUAL... -
Page 52: Warranty And Service Contact Information
This device complies with ISED licence-exempt RSS standard(s). (1) this device may not cause interference, and (2) this device must Operation is subject to the following two conditions: accept any interference, including interference that may cause undesired operation of the device. SPEKTRUM NX10 • TRANSMITTER INSTRUCTION MANUAL... -
Page 53: Compliance Information For The European Union
Directive 2012/19/EU concerning waste of electrical and electronic equipment (WEEE). This label indicates that this product should not be disposed of with household waste. It should be deposited at an appropriate facility to enable recovery and recycling. SPEKTRUM NX10 • TRANSMITTER INSTRUCTION MANUAL... - Page 54 © 2020 Horizon Hobby, LLC DSM, DSM2, DSMX, the DSMX logo, Bind-N-Fly, BNF, the BNF logo, Spektrum AirWare, STi, ModelMatch, AS3X, SmartSafe, and the Horizon Hobby logo are trademarks or registered trademarks of Horizon Hobby, LLC. The Spektrum trademark is used with permission of Bachmann Industries, Inc.
Need help?
Do you have a question about the NX10 and is the answer not in the manual?
Questions and answers
Nose wheel set up on NX10
To set up the nose wheel on the Spektrum NX10, follow these steps:
1. Access the programming menu.
2. Navigate to the gyro settings.
3. Select the first-time setup option.
4. Configure the model and set it to level.
5. Proceed to the nose wheel setup.
6. Select the nose wheel channel.
7. Assign the nose wheel to the appropriate AUX channel (e.g., AUX1).
This setup ensures proper nose wheel control and integration with the AS3X system.
This answer is automatically generated