Modifying User Access - 3Com SERVER LOAD BALANCER 3C16120 User Manual

Modifying User
Access
1 Click Device View on the Toolbar.
2 Select Security > User.
3 You can modify the user access for either the admin or monitor.
To modify the access of either the admin or monitor user, complete the
following steps:
Modifying Admin Access
a To modify the admin access, click Modify Admin. The Modify
Password page appears.
b Enter a new password and confirm.
Modifying Monitor Access
a To modify the monitor access, click Modify Monitor. The Modify
Password page appears.
b Enter a new password and confirm.
CAUTION: The Server Load Balancer does not provide a way to recover a
lost password. If you choose to assign a new password, it is suggested
you keep note of it in a safe place. If you forget your password, you will
be locked out of the unit. If you change the password during the CLI
Server Load Balancer setup, this is the password you should use, and not
the blank default login password. For Technical Support, see Appendix C.
Modifying Security Filters (Attack Mitigation) 73