Adding A Service - 3Com SERVER LOAD BALANCER 3C16120 User Manual

Adding a Service

This is where the load balancing service is defined, along with several
attributes of the service. Remember that the service is associated with an
IP address (the VIP) and a protocol/port combination (the application).
To define a service, complete the following steps:
1 Click Logical View on the Toolbar.
2 Point to the Services window border and left-click the mouse button.
3 In the pop-up list, click Add. The first wizard page appears.
4 Click Next. The Add Service - Application Definition page appears
5 Enter a descriptive name, such as Web, in the Name field.
6 Click Choose application from application library. You are presented with
a list of applications, grouped by application type.
7 Highlight HTTP and click the Next.
8 Click Define new virtual IP address and enter 10.20.30.117 in the
Virtual IP Address field. The VIP address has to be in the same subnet as
the Server Load Balancer.
9 Enter a descriptive name, such as HTTP Service, in the Name field.
10 Click Continue with Advanced Settings.
11 From the Balance Profile drop-down list box, select Profile1.
If you have not created a balance profile, the drop-down list box only
provides a default. See "Creating a Balance Profile (Optional)" on
page 69.
12 Skip the Add Service - Port Override page. Click Next. The port override
allows you to change the destination port that (TCP or UDP) requests will
come into.
13 Click Finish. This completes the set up of the service.
The service name you added, Web, now appears in the lower portion of
the block. Click on a the block to open a pop-up menu that contains
operations you can use to Add, Refresh, Delete, Modify, or Show Status
of the service.
Adding a Service 65