SMARTdesks Newpath Series Assembly Instructions Manual

Universal Assembly Instructions
In practice, all SMARTdesks assemble
using the same approach. They differ in
whether they are a simple desktop, a
48.000
flipIT® desktop, or flat panel FP Series
desktop with monitor port and shelf. The
Newpath latop desks have contoured
panels and tops, but the approach to
MONITOR SHELF
assembly is the same, using Confirmat
Screws for assembling the cabinets and
Lamello Cabineo
WIRE MANAGEMENT
72.000
FPA
WIRE MANAGEMENT
Newpath and LT Series Desks have
no keyboard trays or CPU cabinets.
48.000
flipIT Laptop Safe® instructions
72.000
apply after desk assembly.
6MM TEMPERED GLASS
23.000
19.562
KEYBD X32370 (30153)
KEYBD X32370(#30153)
SECTION "B-B"
surface connectors for attaching the top
to the base cabinets.
These instructions were photo illustrated
B A
with the FI Series flipIT® models. It will
show the keyboard/mouse trays being
installed at an early stage when gravity is
your friend. If your specific desk does not
include a keyboard/mouse tray, please
10.000
A
FPA
B A
WIRE MANAGEMENT
6.000
The DT Series desktop
may include separate
instructions for accessories, such
A
as LCD arms from the LCD arm
manufacturer.
The MiraVista glasstop
desk has a hardwood
brace for mounting
the adjustable, fixed
position LCD arm, and
plate glass that sits in
KEYBD X32370 (30153)
the routed viewport.
UNIVERSAL DESK ASSEMBLY INSTRUCTIONS
30.000
30.000
29.000
26.750
SECTION "A-A"
SECTION "A-A"
OAK/MAPLE
FPA SUPPORT
disregard. This would be true for desks
with the flipIT Laptop Safe®.
You will note that the main difference
between the single and the double is
the additonal CPU bay. The approach to
assembly is the same for both models.
These instructions will emphasize the
double.
MATERIAL:
FINISH:
EDGE:
The FP Series Desk has an
adjustable depth monitor shelf that
installs with pins after desk assembly.
SECTION "B-B"
PART
MATERIAL:
FINISH:
EDGE:
MONITOR
SHELF