3Com OfficeConnect 3C19500 User Manual page 8

Summary of Features
The Network Storage Server has the following features:
One auto-negotiating Ethernet or Fast Ethernet port so you
can install the Network Storage Server in an Ethernet
(10 Mbps) network, a Fast Ethernet (100 Mbps) network or a
dual-speed (10 or 100 Mbps) network. This port can also
operate in full or half duplex mode.
20 GB or 40 GB of storage space.
LED status indicators on the front panel.
A Web-based Administration System that allows a Network
Administrator to:
Configure and manage the Network Storage Server.
Create Users, Groups and Shares and impose security
restrictions on the Network Storage Server.
A Web-based Failsafe Mode that allows the Network
Administrator to:
Upgrade its Operating System.
Run Hard Disk checks.
Reset the Unit back to its factory defaults.
An online help system that gives explanations and instructions
on how to configure the Network Storage Server and use the
Administration System.
A replaceable Hard Disk, in the unlikely event the Hard Disk
should fail.
System Requirements
To install your Network Storage Server, refer to the "Quick
Installation Guide" (DIA1950-0AAA0x) that accompanies this
product. In summary, you will need:
A functioning Ethernet or Fast Ethernet network.
One spare Ethernet or Fast Ethernet port on your Hub or
Switch for each Network Storage Server you wish to install.
An Operating System (Windows
Windows NT 4.0) with network support configured, running
on your workstations.
Microsoft Internet Explorer 4.0 (or above) or Netscape
Navigator 4.5 (or above) as your Web browser to access the
Administration System.
8
®
95, Windows 98 or