Fitting Another Unit
To fit another unit:
1
Rest the second unit on top of the clip and align it with the front
of the unit below.
Press down gently on the unit to secure it onto the clip, ensuring
2
the fastening pieces fit into the slots on the unit below, as
shown in
Figure 2
(picture 2).
Figure 2
Stacking Units Together
1
Fastening
Piece
2
Fastening
Piece
Removing The Stacking Clip
To remove the Stacking Clip:
1
Remove the top unit together with the clip. If you hook a finger
around one of the fastening pieces and then pull it gently out of
the slot, the clip should come away with the upper unit attached
to it.
Push the clip in the center, so it bends towards the base of the
2
unit, and then separate once the clip is loose.
13