Double-Sided Printing; Setting The Fiber Direction - Canon imagePRESS C10000VP Practical Manual

If the Corners of a Paper Fold or Bend During Double-Sided Printing
Folding or bending of the corners of a paper may occur due to curling during double-sided printing� Change the [Adj�
Paper Convey� (2-Sided)] setting according to the folding or bending status�
IMPORTANT
This function may affect how paper is fed� Since increasing the value to a great extent may cause paper jams, we
recommend adjusting the values in small increments�
1
→ [Preferences] → [Paper Settings] → [Paper Type Management Settings] → select the
Press
paper type that you want to edit from the list → press [Details/Edit] → [Change] for <Adj� Paper
Convey� (2-Sided)>�
2
Press [-] or [+] to adjust the paper conveyance → [OK]�
When the corner folds
to the front side

Setting the Fiber Direction

If the output paper is curled, or if paper jams occur frequently after the paper passes through the fixing units under
conditions where the temperature and humidity are high, set <Ppr� Fiber Direction Settings> to [Perpendicular] for the
registered paper to improve the condition�
1
→ [Preferences] → [Paper Settings] → [Paper Type Management Settings] → select the
Press
paper type that you want to edit from the list → press [Details/Edit] → [Change] for <Ppr� Fiber
Direction Settings>�
2
Press [ON] and select [Perpendicular] → press [OK] → [OK]�
When the corner folds
Press [-]
to the reverse side
How to Fix Curled Printouts
Press [+]
imagePRESS C10000VP/C8000VP
45