Advertisement
1.
Check that neither the appliance nor the power cable has been damaged in any
way during transportation before its first use.
2.
Place the heater on a firm, level surface free from obstructions, and at least 3 ft.
(0.9m) away from any wall or flammable material.
3.
With the Power and Setting Control "C" in the "
into a grounded 120V outlet. Always operate the heater in the upright position.
4.
To turn the heater on, turn the Power Switch knob clockwise to the desired
position (I/II/III) and turn thermostat to your desired setting from
(MAX). The Power Indicator Light "A" will illuminate when operating.
to
The power settings operate as follows:
0
: The heater turns off;
I
: The heater operates at 600 watts;
II
: The heater operates at 900 watts;
III
: The heater operates at 1500 watts.
When the room reaches a comfortable temperature, slowly turn the Thermostat
5.
B
Control "
at which the thermostat setting equals the room temperature. At this setting, the
thermostat will automatically turn the heater on and off to maintain this selected
temperature.
6.
Turn the Power and Setting Control "C" to "
the heater when you finish using it.
CAUTION INDICATOR LIGHT: This heater includes a caution indicator to warn
that parts of the heater are getting excessively hot. If the caution indicator light (D)
flashes, immediately turn the heater off and inspect for any objects on
or adjacent to the heater that may cause high temperatures. DO NOT
OPERATE THE HEATER WITH THE CAUTION INDICATOR LIGHT
FLASHING.
" counter-clockwise until you hear a "click" sound. This is the point
0
" position, plug the heater
0
" to turn it off, and then unplug
5
(MIN)
Advertisement
