IN100 Mortise Lock
Step 4
Inside Face of Door
Fig. 8a
Step 5
Align adjustment bolt with threaded hole in lever
Fig. 9a
Adjustment bolt needs
to be threaded in farther.
Step 6 Install I/S lever with set screw:
Notes:
•
Unthread adjustment bolt approximately four turns
for a good starting point (after being fully tightened).
•
Make sure O/S lever is fully inserted into adapter
plate before aligning adjustment bolt.
Copyright © 2016 Corbin Russwin, Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the
express written permission of Corbin Russwin, Inc. is prohibited.
5) Installation Instructions (Continued)
Fig. 9b
Adjustment bolt needs
to be unthreaded.
11
Use Correct Spindle Orientation
STANDARD
MUSÉO
Good
Bad
Lever
Fig. 8b
kƒ„ƒ·
Fig. 9c
Adjustment bolt fully aligned.
Inside Lever
Fig. 10