WilTec 50790 Manual page 24

Operating Procedure
To Raise the Panel
IMPORTANT: Always lower the backstop be-
fore raising the panel to a sloped ceiling or a
side wall.
Crank the winch wheel in the direction shown
(hold the post for leverage) until the panel is at
the desired height.
The brake is spring-loaded to automatically hold
the cradle at the selected height when you stop
cranking.
To Lower the Panel
1. Grasp the wheel handle with your right hand
so you can restrain the backward rotation of the
winch.
2. Retain your hold on the winch handle. Care-
fully release the brake with your left hand and
slowly rotate the wheel backward to lower the
cradle to the desired height.
Disassembly and Storage
Always store the On/wall Lift in a dry. protected
area. To disassemble for more compact stor-
age, refer to page 11.
To avoid serious injury,
watch for overhead ob-
structions when raising
panel.
Cradle drops rapidly
when brake arm is re-
leased.
Control winch with
your right hand on wheel
handle BEFORE releas-
ing brake.
© by WilTec Wildanger Technik GmbH
http://www.wiltec.info
WARNING
CAUTION
Seite 24