Advertisement
Quick Links
Operation Manual
Quad/Motorbike Jack Lift
50799
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps, and technical data can differ insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.
Advertisement
Related Manuals for WilTec 50799
Summary of Contents for WilTec 50799
- Page 1 Operation Manual Quad/Motorbike Jack Lift 50799 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps, and technical data can differ insignificantly.
- Page 2 All rights re- served. The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this operating manual, nor in the diagrams and figures shown.
- Page 3 The device needs to be checked immediately by a specialist in case any unforeseen fault occurs. If one of the strap chains seems to be damaged, the device needs to be taken © by WilTec Wildanger Technik GmbH Item 50799 Page 3 http://www.WilTec.de...
-
Page 4: Installation
6. Repeatedly use the foot pedal to lift the object. Make sure that the locking bar tip properly locks into a notch of the frame when the desired height is reached. 7. Stabilise the jack lift on an even surface by adjusting the stabilisation screw. © by WilTec Wildanger Technik GmbH Item 50799 Page 4 http://www.WilTec.de... - Page 5 Never lift any object above people’s heads! • Never leave the lifted objects unattended. • Never try to repair or extend the iron parts in any way. © by WilTec Wildanger Technik GmbH Item 50799 Page 5 http://www.WilTec.de http://www.aoyue.eu 2022-1...
-
Page 6: Troubleshooting
Opened vent valve Entirely close valve. Too heavy weight Reduce weight. Weight is not being raised. Opened vent valve Close valve. Too low oil level Refill oil. © by WilTec Wildanger Technik GmbH Item 50799 Page 6 http://www.WilTec.de http://www.aoyue.eu 2022-1 http://www.teichtip.de... - Page 7 Fixed castor Important notice: The reprint or reproduction, even of excerpts, and any commercial use, even in part, of this instruction manual require the written permission of WilTec Wildanger Technik GmbH. © by WilTec Wildanger Technik GmbH Item 50799 Page 7 http://www.WilTec.de...