WilTec 50790 Manual page 20

Assembly Procedure (continued)
8. Attach the cradle to the frame
(Figure 6):
a. Insert the cradle's post in-
to the opening on top of
the frame.
b. Secure the cradle to the
frame by snapping the tilt
latch upward so it hooks
over the stud on the cra-
dle.
9. Attach the crossarms to the
cradle:
NOTE: The crossarms are in-
terchangeable.
a. Slide the tapered plates
on the crossarms into the
tapered sockets on the
cradle. (Figure 7)
b. Press each crossarm for-
ward into the socket until
the spring tab on the bot-
tom of the
snaps into place. (Figure
8)
© by WilTec Wildanger Technik GmbH
http://www.wiltec.info
crossarm
Seite 20