Download
Share
Print this page
Cielo Breez Instructions & Assembly
  1. Manuals
  2. Brands
  3. Cielo Manuals
  4. Controller
  5. Breez
  6. Instructions & assembly

Cielo Breez Instructions & Assembly

Wi-fi air conditioner controller
Hide thumbs Also See for Breez:

Advertisement

Quick Links

Download this manual
INSTRUCTIONS / ASSEMBLY
Step 1a: Unpacking and Plugging-in Cielo Breez Wi-Fi Air
Conditioner Controller
For best results, connect Breez with the provided USB cable and adapter. Mount your Breez on a wall in
AC/Heat Pump's line of sight and plug it into a power source.
For optimal placement and control:
•
Place Breez around 2-4 meters (8-14 feet) away and within line of sight of your air-conditioner or heat
pump.
•
To avoid deviated sensor readings, do not place Breez where it may be exposed to excessive sunlight
or other heat sources.
Best Case Scenario: It is strongly advised that whenever there is a need to use Remote Controller
for AC/heat Pump, point it towards Breez while performing any operation. This way, your AC/heat
pump and Cielo Home app will always be in sync.
Step 1b: Prior to App Installation
Your Mobile Phone
•
Make sure Wi-Fi is turned ON on your cell phone.

Advertisement

loading
Need help?

Need help?

Do you have a question about the Breez and is the answer not in the manual?

Questions and answers

Related Manuals for Cielo Breez

Summary of Contents for Cielo Breez

  • Page 1 Step 1a: Unpacking and Plugging-in Cielo Breez Wi-Fi Air Conditioner Controller For best results, connect Breez with the provided USB cable and adapter. Mount your Breez on a wall in AC/Heat Pump's line of sight and plug it into a power source.
  • Page 2 Make sure you have working internet connection on your Wi-Fi Router. Step 2a: App Installation • Go to the App Store / Play Store. In search section type "Cielo Home". Once "Cielo Home" app is displayed, press the install button. •...
  • Page 3 For Android Users Step 3a: Register Cielo Breez - for iOS Users Breez registration process is meant to connect the smart controller to your home Wi-Fi network through Cielo Home app. To begin registration: • Open 'Cielo Home App' Tap on "+" in the Home Screen and press ‘Begin Registration’ in the next screen.
  • Page 4 • Next, go back to Cielo Home App. • Select your home Wi-Fi Network from the list. • Enter the password of your home Wi-Fi Network. • In the next screen, type device name of your choice. (For e.g. Master Bedroom, Lounge etc.)
  • Page 5 Your registration process is complete. Cielo Breez will appear on your home screen. Step 3b: Register Cielo Breez - for Android Users Breez registration process is meant to connect the smart controller to your home Wi-Fi network through mobile app. To begin registration: •...
  • Page 6 • Next, go back to Cielo Home App. • Select your home Wi-Fi Network from the list. • Enter the password of your home Wi-Fi Network. • On the next screen, type device name of your choice. • Next, carefully select "manufacturer" and "remote model number" from respective drop down list. (The...
  • Page 7 Breez is NOT working with your air conditioner/heat pump, adopt the following procedure. 1. On your home screen in Cielo Home app, go to device settings by tapping "wrench symbol" on the registered device (for both android & iOS users).
  • Page 8 Step 4a: Your Home screen Your home screen shows the real-time status of all your connected Cielo smart devices. If you have only one Breez Smart Controller, a single device will be displayed. A connected Breez-Smart Controller displays 3 types of status, shown as outlined circles.
  • Page 9 Step 4b: Refreshing Status of Smart controllers. Refresh the Cielo home screen by swiping downwards. Step 4c: Turning ON Smart AC/Heat Pump Press the power button to turn ON the Air-Conditioner/heat pump.
  • Page 10 Step 5: Understanding the Control Screen...
  • Page 11 Step 6a: Setting up the schedules - for iOS Users You can schedule your Air-Conditioner / Heat Pump through Cielo Breez by following the below given steps: • On the Home Screen, tap on the Air-Conditioner / Heat Pump you want to schedule.
  • Page 12 Step 6b: Deleting a schedule - for iOS Users Tap on ‘Schedules’ option. On this screen you will be able to see all your set schedules. • Swipe left on the schedule you want to delete until the ‘Delete’ option appears. Press ‘Delete’. •...
  • Page 13 Step 6a: Setting up the schedules - for Android Users You can schedule your Air-Conditioner / Heat Pump through Cielo Breez by following the below given steps: • On the Home Screen, tap on the Air-Conditioner / Heat Pump you want to schedule.
  • Page 14 You may choose to name the schedule/schedules as per your preference. Press “Save” to set-up the schedule. After Breez performs the scheduled activity on your Air- • Conditioner / Heat Pump you will get a notification in the timeline.
  • Page 15 Step 6b: Deleting a schedule - for Android Users Tap on ‘Schedules’ option. On this screen you will be able to see all your set schedules. • • Swipe left on the schedule you want to delete and it will automatically delete the schedule. •...
  • Page 16 Step 7a: Enabling location controls - for iOS Users You can configure location based control for your Air-Conditioner / Heat Pump through Cielo Breez by following the below given steps: 1. On the home screen, tap on the Air-Conditioner / Heat Pump you want to control through location controls.
  • Page 17 Step 7b: Enabling location controls - for Android Users You can configure location based control for your Air-Conditioner / Heat Pump through Cielo Breez by following the below given steps: 1. On the home screen, tap on the Air-Conditioner / Heat Pump you want to control through location controls.
  • Page 18 Air-Conditioner / Heat Pump ON/ OFF. 4. Make sure to check the box to select the location of Cielo device. 5. Select your desired AC settings to be performed when you exit or enter the pre-set location and press "Save".
  • Page 19 • To decrease the temperature of your AC, press Down button. All the actions performed via temperature control buttons will be displayed in the timeline of Cielo Home App. Note: You will not be able to change the temperature of your Air-Conditioner / Heat Pump...
  • Page 20 Tap on ‘Change Picture’. You will be directed to a page with an image of Breez. Press "Custom Image" in the next screen. Tap on the display picture on Breez image. You may be asked for permission to access your phone’s storage.
  • Page 21 You can add a photo by taking a new picture or uploading an old picture from your phone’s gallery. After selecting the picture, Cielo Home will ask you to crop it. Drag the cropped dimension window over the desired part of your image. Tap on "Crop". Your image is now changed.
  • Page 22 Note: You can change the Breez Image to Default anytime by selecting "Default Image". Step 9b: How to change display picture on Cielo Breez (for iOS Users) Tap on the "Wrench Icon" of your Device icon. Tap on ‘Change display image’...
  • Page 23 After selecting your desired image, tap on ‘Save’ at top right corner of the screen. Your image is now changed. Note: You can change the Breez Image to Default anytime by selecting "Default Image".
  • Page 24 Step 10a: Turning OFF the Display screen on Cielo Breez (for Android Users) Go to your home screen on Cielo Home App and tap on the "Wrench icon" of your Device icon. Press "Turn Display Off". The Display screen on Breez will turn OFF.
  • Page 26 Go to your home screen on Cielo Home App and tap on the "Wrench Icon" of your Device icon. Press "OFF" on the Display toggle button. The Display screen on Breez will turn OFF. You can turn ON the Display screen on Breez anytime by selecting "ON" on the Display toggle button.
  • Page 27 To create a Zone in Cielo Home App, follow the below mentioned instructions: Open Cielo Home App and tap on the "wrench symbol" of the device that you want to add in a certain Zone. Press "Move to Zone". Cielo Home App will prompt you to create a Zone of your choice. You can choose an icon from the available icons and give it a name.
  • Page 29 To create a Zone in Cielo Home App, follow the below mentioned instructions: Open Cielo Home App and tap on the "wrench symbol" of the device that you want to add in a certain Zone. Press "Move to Zone". Cielo Home App will prompt you to create a Zone of your choice. You can choose an icon from the available icons and give it a name.
  • Page 31 Step 12a: Adding a Device to the Zone (for Android Users) To add the device in a certain Zone, tap on the "wrench symbol" of the device. Press "Move to Zone". A list of available zones will appear and you can add your device to the Zone of your choice by selecting the name of that Zone or creating a new Zone as per your preference.
  • Page 32 Step 12b: Adding a Device to the Zone (for iOS Users) To add the device in a certain Zone, tap on the "wrench symbol" of the device. Press "Move to Zone". A list of available zones will appear and you can add your device to the Zone of your choice by selecting the name of that Zone.
  • Page 33 Step 13a: Changing the Zone of Device (for Android Users) To change the Zone of the device, select the Zone in which your desired device has been placed. Tap on "wrench symbol" of the device and press "Remove from Zone". The Device will appear in the Home screen.
  • Page 34 Step 13b: Changing the Zone of Device (for iOS Users) To change the Zone of the device, select the Zone in which your desired device has been placed. Tap on "wrench symbol" of the device and press "Remove from Zone". The Device will appear in the Home screen.
  • Page 35 "Edit Zone". Change the icon and name of the Zone as per your choice and press "Save". To delete a Zone, you have to remove all the devices inside that zone first. Cielo Home App will not allow you to delete a certain Zone unless all the devices from the Zone have been removed. After you have removed all the devices from the Zone, press the "wrench symbol"...
  • Page 36 "Edit Zone". Change the icon and name of the Zone as per your choice and press "Save". To delete a Zone, you have to remove all the devices inside that group first. Cielo Home App will not allow you to delete a certain Zone unless all the devices from the Zone have been removed. After you have removed all the devices from the Zone, press the "wrench symbol"...
  • Page 37 Users) There are two ways to delete Cielo Breez if you are an iOS User: Long tap on the Cielo Device you want to delete. The device will start shaking with an 'X' sign. Press 'X' button. Press ‘Delete’. Your Cielo Device has been deleted.
  • Page 38 Step 15b: Deleting Cielo Device from Cielo Home App (for Android Users) Go to the Home screen and tap on three dot symbol of your Cielo Device. Press ‘Delete’. Press ‘Yes’ to delete your device.