181,"Invalid outside macro denition;( 181)"
181
Indicates that a macro parameter placeholder was encountered outside
of the macro denition.
180,"Macro error;( 180)"
180
An error occurred while attempting to dene, query or use a macro.
Check that the macros are correct using *LMC? and *GMC?.
178,"Expression data not allowed;( 178)"
178
Correct the HP-IB controller program so that the data included with
the HP-IB command does not contain parentheses.
171,"Invalid expression;( 171)"
171
The expression contained a syntax error like unmatched parenthesis or
an illegal character.
170,"Expression error;( 170)"
170
The expression contains a syntax error.
168,"Block data not allowed;( 168)"
168
Correct the HP-IB controller program so that the data included with
the HP-IB command does not contain block data (no # character).
161,"Invalid block data;( 161)"
161
Correct the HP-IB controller program so that it contains a correct block
data type. A block data type should begin with \#" followed by a
number.
160,"Block data error;( 160)"
160
The block data contains a syntax error.
158,"String data not allowed;( 158)"
158
Correct the HP-IB controller program so that the data included with
the HP-IB command does not contain string data (no single or double
quote characters).
151,"Invalid string data;( 151)"
151
Correct the HP-IB controller program so that the string data included
with the HP-IB command is terminated with a single or double quote.
The terminating quote must be the same as the leading quote of the
Error Messages
Messages
8-9