Pioneer CDS-P5000 UC Service Manual page 42

CDS-P5000
- Removing the Spindle Motor(Fig.3)
Be careful.
This work requires
considerable force
and involves the danger
of injury.
Turn the support wheel
so that the screw head
become visible through
the hole.
- Removing the Loading Motor(Fig.4)
Each spring
is different
type.
After raising
the guide arm
90˚, remove it.
Stand the back
side of the arm,
lift up the left
then remove.
42
Fig.2
The loading motor
is soldered on
the PCB.
Fig.4