4. CD MECHA ASSY
Proceedingn :
REARnMOLDnPANEL
(1) Tray is opened and CD DOOR is removed.
(2) Remove the screws. Remove the connector.
(3) Laser short-circuit in Pick-up of CD MECHANISM ASS'Y, then disconnect the connector wires and FFC cable.
Be sure to wear a grounding band.
→
→
SIDEnPANEL
TOPnPANELnASSY
View from the bottom
View from the CD MECHA bottom
17
→
CDnMECHAnASSY
↑Shooting direction: B↑
Soldering place
CN82
CN80