Table of Contents
Advertisement
Maintenance
Battery Replacement
The battery illuminates the bubble level. It should be replaced whenever the illumination is inadequate.
1.
Use a coin or flat screwdriver to unscrew the battery cover.
2.
Carefully pull the battery out of it's compartment.
3.
Fit a replacement CR 2032 3V battery in the compartment, ensuring that the positive side (+) of the battery faces outermost.
4.
Replace the battery cover and tighten using a coin or flat blade screwdriver.
5.
Press the bubble level illumination button and verify that the bubble is lit for approximately 20 seconds.
Ensure the old battery is disposed of responsibly, visit
19
www.http://www.ocon.com/support/weee-recycling/
for further information and advice.
Hide quick links:
Advertisement
Table of Contents
