3Com 7754 Installation Manual page 56

56 C 4: M
HAPTER AINTAINING
Upgrading Software
Using The BOOT Menu
S
OFTWARE
Privilege note: 0-VISIT, 1-MONITOR, 2-SYSTEM, 3-MANAGE
<SW7750>ftp 10.10.110.1
Trying ...
Press CTRL+K to abort
Connected.
220 3Com 3CDaemon FTP Server Version 2.0
User(none):anonymous
331 User name ok, need password
Password: xxxxxxx
230 User logged in
[ftp]bin
200 Type set to I.
[ftp]get sw7750003.app
200 PORT command successful.
150 File status OK ; about to open data connection
226 Closing data connection; File transfer successful.
FTP: 3794803 byte(s) received in 130.480 second(s)
29.08Kbyte(s)/sec.
[ftp]quit
221 Service closing control connection
<SW7750>boot boot-loader primary sw7750003.app
The specified file will be booted next time!
<SW7750>reboot
This will reboot Switch. Continue? [Y/N] y
For more detailed descriptions of the setup and procedures for upgrading
software, see the remaining sections in this chapter.
To perform this procedure, you must have a network connection to the
management port on the Switch 7750 Fabric module.
After powering on the Switch 7750, the BootROM program runs automatically.
The terminal displays the following information:
Starting......
RAMLine.....OK
System is booting.....................
******************************************
*
* Switch 7750 BOOTROM, Version 516
*
******************************************
Copyright (c)
Creation date
CPU type
CPU Clock Speed : 400Mhz
BUS Clock Speed : 66Mhz
BOOT_FLASH type : M29W040B
Flash Size
Memory Size
: 2003-2005 3Com Corporation
: Jan 20 2005, 09:37:12
: MPC8245
: 32MB
: 256MB
*
*
*