3Com 7754 Installation Manual page 50

50 C 3: C
HAPTER ONFIGURING THE
S 7750
WITCH
Figure 37 Connection Description Dialog Box
2 Enter the name of the new connection in the Name field and click OK. The dialog
box, shown in Figure 38 displays. Select the serial port to be used from the
Connect using dropdown menu.
Figure 38 Properties Dialog Box
3 After selecting serial ports, click OK. The port shown in Figure 39 displays and you
can set serial port parameters. Set the following parameters:
Baud rate = 9600
■
Databit = 8
■
Parity check = none
■
Stopbit = 1
■
Flow control = none
■