Viewing Or Changing Service Data - Sony KDL-32CX525 Service Manual

3. The DIGITAL Service Menu displays.
NOTE: There are 3 Service Menus for this model, DIGITAL,
CHASSIS, and VPC. If the DIGITAL Service Menu is not
displayed, press JUMP or OPTIONS on the Remote
Commander.
DIGITAL
001 OP
000 VERS
<MAIN>
DM1.301W00AA
WF1.003W00AA
DF1.001W00AA
YM1.010W00AA
DB2.105W00AA
(DM1.301W00A)
DD1.016W00AA
WP0.521W00AA
MID:1C117081
PID:0402000
PNL:LTY320AB01
POP:X.XXX
FIGURE 7-1. SAMPLE DIGITAL SERVICE MENU
CHASSIS
000
000
FIGURE 7-2. SAMPLE CHASSIS SERVICE MENU
KDL-32CX525/40CX525
SECTION 7 - SERVICE ADJUSTMENTS
SERVICE
---
<EXT>
RF:01.05
WF:2.0.0.99
WF:0B
CAN:X.XXX
FDlXXXX
<PEM>
PM1.012W00LU
PB1.000W00LU
PL1.011J46LUX
PD1.011J46LUX
press
JUMP
or
OPTIONS
SERVICE
WYVERN
S2_NOISE_TH 32

VIEWING OR CHANGING SERVICE DATA

Within each Service Menu are Categories and data information.
Category Number
Item Number
FIGURE 7-3. SERVICE DATA DEFINITIONS
Use the buttons on the Remote Commander to review or change the
service data.
4. To change the Category, press 2 to move to the Next
Category or press 5 to go back to the Previous Category.
Note: Pressing 2 or 5 only changes the Categories within
the Service Menu displayed.
5. To change the adjustment item, press 1 to move to the
Next Item or 4 to go back to the Previous Item.
6. To change the Data Value, press 3 to increase the Data
Value or 6 to decrease the Data Value.
7. Press MUTING then press 0
changes.
8. To exit service mode, press HOME or turn the TV power
off.
Category Name
CHASSIS SERVICE
000
WYVERN
000
S2_NOISE_TH
Item Name Data Value
to WRITE (Save) the
32
49