2-1. VIEWING SERVICE ADJUSTMENT DATA
There are no adjustments necessary for these models. All data has been
set for optimal viewing for our customers. The following sections are for
informational purposes only.
2-2. ACCESSING SERVICE ADJUSTMENT
MODE
1. TV must be in standby mode. (Power off).
2. Press the following buttons on the Remote Commander within a
second of each other:
Channel 5
DISPLAY
DISPLAY
5
VOLUME+
RM-YD028
The fi rst service menu (TV) displays.
KDL-26L5000/32L5000
SECTION 2: SERVICE ADJUSTMENTS
Volume +
TV POWER .
POWER
Onscreen cursor
and select button
Sample TV Service Menu
2-3. RESETTING TO FACTORY DEFAULTS
Use the following instructions to restore the User Controls and
Channel Memory settings to the preset factory conditions.
1. While holding down the
POWER button on the right side of the set.
The set restarts and displays the initial setup screen. This may take
several minutes.
KDL-26L5000/32L5000
on the Remote Commander, press the
21