Verifying Service Adjustments; Verifying The Segment Code; Verifying The Destination - Sony KDL-32CX525 Service Manual

VERIFYING SERVICE ADJUSTMENTS

The following procedures should be performed after updating the
software to ensure that the service adjustment data is accurate.
● Verify the Segment Code
● Verify the Destination
● Verify the Model Name

VERIFYING THE SEGMENT CODE

After updating the software, go into Service Mode to verify the
Segment Code data value is set.
CAUTION: Selecting the incorrect destination may requiring replacing
the Main Board.
1. TV must be in standby mode. (Power off).
2. Access Service Mode by pressing the following buttons on
the Remote Commander within a second of each other:
DISPLAY Channel 5
DIGITAL
001 OP
000 VERS
<MAIN>
DM1.301W00AA
WF1.003W00AA
DF1.001W00AA
YM1.010W00AA
DB2.105W00AA
(DM1.301W00A)
DD1.016W00AA
WP0.521W00AA
MID:1C117081
PID:0402000
PNL:LTY320AB01
POP:X.XXX
KDL-32CX525/40CX525
SECTION 7 - SERVICE ADJUSTMENTS
Volume + POWER .
SERVICE
---
<EXT>
RF:01.05
WF:2.0.0.99
WF:0B
CAN:X.XXX
FDlXXXX
<PEM>
PM1.012W00LU
PB1.000W00LU
PL1.011J46LUX
PD1.011J46LUX
3. Press 2 to move to the 002 MODEL category.
DIGITAL
002 MODEL
000 SEG
4. Using the table, press 3 to increase the data value or
6 to decrease the data value, to select the correct segment
code data value.
Model Name
KDL‐32CX525
KDL‐40CX525
5. Proceed to "Verifying the Destination".

VERIFYING THE DESTINATION

The correct model may need to be selected after updating the
software.
6. Press 1 to move to the 001 DEST item.
DIGITAL
002 MODEL
001 DEST
SERVICE
I1_I5
Code Name Segment Code
P‐2 I4
P‐2 I4
SERVICE
LTN/ATSC
50