Moog MATRIARCH Firmware Update page 12

V1.2.0 RELEASE NOTES
Global Parameters
4.9 MIDI OUT Filter - Pitch/Mod Wheels
C0 = off, D0 = on (default). This setting controls whether or not MIDI CC messages are output in response to movement of the
Pitch Wheel or Mod Wheel. ON is the setting that allows messages to be sent.
4.10 MIDI OUT Filter – Keys
C0 = off, D0 = on (default). This setting controls whether or not MIDI Note messages are output in response to playing on the
Grandmother keyboard. ON is the setting that allows MIDI notes to be sent.
NOTE: Tuning scales are imported into Matriarch via MIDI, and can be sent from tuning software such as Scala,
or the Moog Phatty Tuner. Matriarch supports the following MIDI TUNING STANDARD message types:
· Bulk Tuning Dump (128-note scales)
· Single-Note Tuning (retunes notes individually)
· Scale/Octave Types 5, 6, 8, 9 – 1-Byte and 2-Byte formats.
The official MIDI Tuning Standard description is part of The Complete MIDI 1.0 Detailed Specification PDF document, available
free of charge at www.midi.org. You will be required to register at the site in order to access this document, and other information
related to MIDI.
Global Parameters
5.1 ARP/SEQ CV OUT Mirrors KB CV
C0 = off (default), D0 = on. This setting allows the CV OUT, GATE OUT, and VEL OUT jacks in the ARP/SEQ section of the panel
to reflect the KB CV OUT, KB GATE OUT, and KB VEL OUT signals any time the Arp/Sequencer is not running.
(Continued)
Group 4
Group 5
Group Select Parameter
Key Select Key
G#2
G#2
Group Select Parameter
Key Select Key
A#2
Sync Enable
Button Blinks
G#1 4 x / 9 x
A#1 4 x / 10 x
Sync Enable
Button Blinks
C#0 5 x / 1 x