Using The On-Screen Display (Osd) Controls - Lenovo G24-10 User Manual

Using the On-Screen Display (OSD) controls

To adjust the settings, the user controls can be viewed through the OSD.
G24-10
Model
Resolution
Max Refresh Rate
Mode
Firmware
Serial Number
Input Signal: HDMI
To use the controls:
1. Press to open the main OSD menu.
2. Use or
function. If there is a sub-menu, you can move between options using
press to select that function. Use
3. Press to move backwards through the sub-menus and exit from the OSD.
4. Press and hold
adjustments to the OSD. Press and hold
adjustments to the OSD.
5. Enables DDC/CI by default. Use OSD Exit Key, press and hold
disable / enable DDC/CI function. A message "DDC/CI disable" is shown on the screen.
1920x1080
G24-10
1920x1080
60.0Hz
Normal
Firmware Version
Serial Number
to move among the icons. Select an icon and press
or
for 10 seconds to lock the OSD. This will prevent accidental
60Hz
@
to access that
to make adjustments then press
for 10 seconds to unlock the OSD and allow
for 10 seconds to
or , then
to save.
2-4
Chapter 2.