Caring For Your Monitor; Detaching The Monitor Base And Stand; Wall Mounting (Optional) - Lenovo G24-10 User Manual

Caring for your monitor

Be sure to turn off the power before you perform any maintenance on the monitor.
Do not:
•
•
•
•
•
Do:
•
•

Detaching the monitor base and stand

Step 1: Place the monitor on a soft and flat surface.
Step 2: Remove the screws from base before detaching base and stand from the monitor.

Wall Mounting (Optional)

Refer to the instructions that come with the base mounting kit. To convert your LCD display
from a desk-mounted to a wall-mounted display, do the following:
Step 1: Verify that the Power button is turned Off, then disconnect the power cord.
Step 2: Lay the LCD display face down on a towel or blanket.
Apply water or liquid directly to your monitor.
Use solvents or abrasives.
Use flammable cleaning materials to clean your monitor or any other electrical equipment.
Touch the screen area of your monitor with sharp or abrasive items. This type of contact
may cause permanent damage to your screen.
Use any cleaner which contains an anti-static solution or similar additives. This may harm
the coating of the screen area.
Lightly dampen a soft cloth with water and use this to gently wipe the covers and the
screen.
Remove grease or finger marks with a damp cloth and a little mild detergent.
2-9
Chapter 2.