Table of Contents
Advertisement
Presetting Disc Names
Store the names of discs to be displayed when played.
1
Play the disc whose name you want to preset.
NOTE
• This function is not available for disc changers that do not feature
the Disc Name Preset function.
• This procedure is not to be used to store the disc and track
titles for MDs that you record.
2
Hold down the NAME SET button for two seconds or more.
"NAME SET" is displayed and the disc name preset mode is
entered.
The cursor blinks in the position where character input can be
made.
3
Press either the 4 or ¢ button to move the cursor to the
desired position.
The 4 button moves the cursor to the left, and the ¢ but-
ton to the right.
You can also move the cursor left or right by pressing the
+
–
TRACK
or TRACK
buttons, respectively, on the remote con-
trol.
+
–
4
Press the DISC
or DISC
acter.
Besides the alphabet (capital letters only) and numerals, you
can choose the following characters: [, ], /,
>.
NOTE
Direct Input (Function of remote control)
If the disc changers that were manufactured and sold after 1997
are connected, you can directly input letters using the
number/letter entry buttons on the remote control.
Example: Use the following table to enter the name "DANCE".
button to display the desired char-
+
–
,
, *, =, <, and
Character
"D"
"A"
"N"
"C"
"E"
5
Continue steps 3 and 4 until all the characters are chosen for
the name.
NOTE
You can enter up to 8 characters for each name.
6
Press either the NAME SET button on the main unit or the OK
button on the remote control.
The disc name is stored and the disc name preset mode is can-
celled.
If you make no entry in a 10-second period, the name will be
stored with the characters entered so far.
NOTE
• The number of discs whose names can be stored will differ
depending on the disc changer that is connected. Please see
your disc changer manual for details.
• Discs are identified by their total length and number of tracks. If
you play another CD that happens to have exactly the same
specifications as another CD whose name is stored, the wrong
name will be displayed for it.
• If you want to change the name of a disc, repeat steps 1 and 2
to display the name, and then repeat steps 3 and 4 to enter the
changes.
• Pressing the reset button does not erase the disc names stored
in a disc changer.
— 23 —
# Times
Button to press
pressed
#3
1
#2
1
#6
2
#2
3
#3
2
- Quick Links:
- Power
- Specifications
Hide quick links:
Advertisement
Table of Contents
