Kenwood KRC-459R Instruction Manual page 11

Tuner Mode
• Numeric buttons
Press buttons #1-6 to recall preset stations.
During direct access tuning, use these buttons to input the fre-
quency of the station.
• TUNE buttons
–
Press the TUNE button to decrease the frequency.
+
Press the TUNE button to increase the frequency.
• AM/FM button
Press the AM button to select the MW and LW bands.
Press the FM button to select and switch between FM1, FM2,
and FM3 bands.
• DIRECT button
Selects the direct access tuning mode, used to input frequen-
cies directly. Press this button again to cancel the mode whilst it
is operating.
Tape Mode
• T.ADV (4/¢) buttons
Press the 4 button to start play again at the beginning of the
current track.
Press the ¢ button to start play at the beginning of the next
track.
• REW button
Rewinds the tape.
• FF button
Fast forwards the tape.
• PROG button
Plays the reverse side of the tape. When pressed during fast for-
wards and rewinds, this button stops the tape and starts playing
it.
Disc Changer Mode
• Number/ letter entry buttons
Used to specify the track (disc) number used in direct track
(disc) searches.
Used to enter letters during disc name preset.
• TRACK buttons
–
Press the TRACK button to search through the tracks back-
wards.
+
Press the TRACK button to search through the tracks for-
wards.
Used to move the cursor whilst entering disc name.
• DISC buttons
–
Press the DISC button to search through the discs backwards.
+
Press the DISC button to search through the discs forwards.
Selects numbers and symbols whilst entering disc name.
• 38 button
When a disc is playing, this button pauses the play.
Press the same button again to start play again.
• OK button
Stores letters that have been entered during disc name input
and ends enter mode.
— 11 —