Blank Skip Function; Music Repeat Function; Disc Changer Control Features; Playing Discs Using Disc Changer - Kenwood KRC-459R Instruction Manual

Blank Skip Function

Automatically fast forwards to the beginning of the next track
when long blank spaces (10 seconds or more) are detected,
continuing tape playback.
Turning Blank Skip Function On/Off:
Press the B.S button to switch the blank skip function on and
off.
The B.S indicator lights up when the blank skip function is
turned on.
NOTE
• If the blank space contains much noise, the blank skip function
may not work right.
• Sections recorded at low levels may trigger the blank skip func-
tion if they last for 10 seconds or more.

Music Repeat Function

Repeatedly plays the current track.
Turning Music Repeat Function On/Off:
Press the REP button to switch the music repeat function on
and off.
The REP indicator lights up when the music repeat function is
turned on.
Cancelling Music Repeat Function:
Press either the REP or 2 3 button.
NOTE
The music repeat function "knows" where a track begins by
detecting the blank space preceding it (i.e., the space between
tracks). However, when the blank space lasts for less than 4 sec-
onds or contains noise, this function may not operate correctly.
Furthermore, sections recorded at low levels may trigger the
function if they last for 4 seconds or more.

Disc changer control features

When the disc changer with the old/new selection switch is
connected, set the switch to "O " (old) position to operate the
disc changer mode.

Playing Discs Using Disc Changer

Playing Discs:
Press the CD•MD button.
The disc indicator lights up during disc changer mode.
When one disc has finished playing its last track, the next disc
on the changer starts playing. When the last disc in the chang-
er has finished, the player returns to the first disc and starts
playing it.
Disc #10 is displayed as "0".
Pausing and Restarting Disc Play:
Press the 38 button to make the disc pause.
Press the same button again to start play again.

Switching Display for Discs

Switch the display that appears whilst discs are playing.
Switching Display for Discs:
Each time you press the DISP button, the display during disc
play switches as follows.
Track time
Disc name
Disc title (MD only)
Track title (MD only)
NOTE
• You can give names to discs through the presetting disc name
function (see p. 23).
• If you try to display the name of a disc that does not have one,
"NO NAME" is displayed instead.
— 19 —
(See page 7)