Tuner Features; Tuning - Kenwood KRC-478R<u>/RV</u> Instruction Manual

Tuner features

LOUD SCAN B.S/RDM
#1~6
ST indicator Frequency
4
SRC FM
EJECT MENU
SRC
PWR
OFF
/ PTY
DISC
REP D.SCN M.RDM
DISC
CLK
TI
VOL ADJ NAME.S
CLK
AM
Band display
Preset station number

Tuning

¢
1
Press the SRC button repeatedly until the tuner mode is
obtained. "TUNER" is displayed only when the tuner mode is
selected.
2
Press either the FM or AM button to select the band.
Each time you press the FM button, the band switches
between the FM1, FM2 and FM3.
Press the AM button to select the MW and LW bands.
3
• Auto Seek Tuning
Press the ¢ button to seek increasing frequencies.
Press the 4 button to seek decreasing frequencies.
• Preset station seek tuning
Press the ¢ button to move to the next preset station (i.e.,
the one with the next highest number), and the 4 button to
move to the last preset station (i.e., the one with the next
lowest number).
NOTE
If the frequencies stored at the preset numbers receive
stations which were not originally memorized when traveling
long distances, the preset number is not displayed. In such
cases, pressing the 4/¢ button to use preset station seek
will receive channel 1.
• Manual Tuning
Press the ¢ button to increase the frequency by one step.
Press the 4 button to decrease the frequency by one step.
NOTE
• The ST indicator lights up when stereo broadcasts are being
received.
• Please see the menu settings about selecting tuning mode.
(page24)
— 9 —