Page 2
Check list Before you start assembling your cage, please check if you have all the components. If any part is missing or damaged, do not use your cage. 1 plastic bottom tray 1 stainless steel feeding bowl 1 platform 1 drinking bottle + holder C+ D 4 fixings for platform 1 small animal house...
Page 3
instruction video ATTENTION To avoid leakage, always fill bottle 100%. Om lekken te vermijden, vul de fles altijd 100%. Afin d’éviter des fuites, toujours remplir la bouteille 100%. Um Tropfen zu vermeiden, Tränke immer 100% füllen. Para evitar gotas, siempre llenar la botella 100%. Rince spout with hot water before first use.
Page 4
Slide one side panel (l) into two profiles (f ). Slide the back panel (n) in the third profile. Make sure that the vertical wires of the back panel and the closure of the side panel are facing outwards. Slide the second side panel (l) into the final profile. Make sure the closure is facing outwards.
Page 5
Put the cage part on the bottom tray as shown in the picture. Insert 4 x d in the platform (b). Place the platform in the corner of the side and back panel. Do not tighten the screws (c) too strongly.
Page 6
The platform has now been installed. Attach the ladder (e) to the platform. h + i + k + j Assemble the remaining accessories: wheel (h), feeding bowl (i), small animal house (k) and drinking bottle (j). Slide the front panel with door (m) into the profiles.
Page 7
Place the roof panel (o) on top. Make sure that the thick horizontal wires of the front, back and side panels are well assembled in the roof panel. (see detail). Finally, fix the closures of the side panels well to the bottom. Your cage is now ready to be used.