ctrlX HMI DE0015, DE0021 Multi-Touch
Displays (Housing Devices)
12.1 "On Screen" menu
Make the display settings of the DE devices via the "On Screen" menu. To oper-
ate the "On Screen" menu, use the two touch buttons "i" and "Home" on the
front of the DE devices:
"Home" key
●
●
"i" key
Navigating within a menu
If there is no operation for five seconds, the currently selected set-
ting is applied automatically.
12.1.1 Brightness
The screen brightness is set via the "On Screen" menu under the menu item
"Brightness".
Fig. 12-2: On Screen menu – Brightness
1. Press the "Home" key to open the On Screen menu.
2. Press the "i" key to toggle to the menu item "Touch".
3. Press the "Home" key to confirm the selection to reach the "Brightness"
menu.
4. Press the "Home" key to set the brightness between 0 and 100 percent.
5. Press the "i" key to toggle to "Exit".
6. Press the "Home" key for confirmation purposes.
If the brightness is 0, the display on the screen cannot be seen any-
more.
12.1.2 Video Input
To set the video interface used (XCDI+rx, XDP, XHDMI), go to the On Screen
menu under the menu item "Video Input".
Opening the "On Screen" menu
Confirming the selected menu item.
Brightness
Video Input
PIP
Touch
Exit
Brightness
Exit
90%
R911405731_Edition 02 Bosch Rexroth AG
35/45
Device description