Table of Contents
Advertisement
ctrlX HMI DE0015, DE0021 Multi-Touch
Displays (Housing Devices)
stalled and used as specified in the operating instructions. Harmful interferen-
ces can result if this device is operated on a residential area. In this case, the
user has to eliminate the interferences at his own expense.
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions:
This device may not cause harmful interferences.
●
This device has to tolerate any receiving interferences, including interferences
●
that can cause undesired operation.
8.4 UL/CSA certified
The devices are certified according to
UL 62368 (Industrial Control Equipment) and
●
CSA22.2 No. 61010-2-201 (CSA)
●
However, there can be combinations or extension stages with a limited or miss-
ing certification. Thus, verify the registration according to the UL marking on the
device.
Loss of UL/CSA conformity due to modifications at the device
UL and CSA marking applies only to the device upon delivery. After
modifying the device, verify the UL and the CSA conformity.
9 Interfaces
Fig. 9-1: Interfaces
9.1 Overview
The following connections are available:
Labeling at the housing Connection type
XCDI+rx
XDP
XHDMI
RJ-45 interface (video
and data interface)
Video connection to the
control cabinet PC
Video connection to the
control cabinet PC
Connection type (at the
device)
RJ45 socket
Display port socket,
20 pin
HDMI female connector,
type A,
19 pin
R911405731_Edition 02 Bosch Rexroth AG
13/45
Interfaces
Mating connector or ca-
ble (from outside)
RJ45 plug
Display port plug,
20 pin
HDMI connector, type A,
19 pin
Advertisement
Table of Contents
