20/45
Mounting and electrical installation
The provided screws can be used for VESA fastenings up to a materi-
al thickness of 1.0 mm. Use longer screws for VESA fastenings with a
greater material thickness!
Mount the display as follows:
1. Attach the support arm with four M4 screws at the support arm adapter.
2
①
Support arm
②
Adapter
③
Marking for the alignment towards
the top
Fig. 10-2: Support arm at adapter
2. Screw two M5 screws into the upper bolt holes on the rear panel of the de-
vice.
Bosch Rexroth AG R911405731_Edition 02
ctrlX HMI DE0015, DE0021 Multi-Touch
3
1
④
Four M4 screws
Displays (Housing Devices)
4