Pin Assignment Of The Keypad; Mounting And Electrical Installation - Bosch Rexroth ctrlX HMI DE0015 Operating Instructions Manual

18/45

Mounting and electrical installation

9.8.3 Pin assignment of the keypad

Pin Function
1 S4 (blue) N/O contact, N/C contact
2 S4 (blue) N/O contact
3 S4 (blue) N/C contact
4 LED2 in S2 24 V
5 LED4 in S4 24 V
6 LED2 and LED4 0 V, GND
Tab. 9-4: Pin assignment of keypad CN1
Pin Function
1 S1 (E-STOP) N/C contact 1
2 S1 (E-STOP) N/C contact 1
3 S1 (E-STOP) N/C contact 2
4 S1 (E-STOP) N/C contact 2
5 S2 (white) N/O contact, N/C contact
6 S2 (white) N/O contact
7 S2 (white) N/C contact
8 S3 (black) N/O contact, N/C contact
9 S3 (black) N/O contact
10 S3 (black), N/C contact
Tab. 9-5: Pin assignment of keypad CN2
NOTICE
For terminal connectors use copper wire only. Tighten the screws of the screw
terminals with a torque of 2.25 lb in (0.25 Nm).
10 Mounting and electrical installation
NOTICE
Tighten the screws and nuts with the corresponding torque according to the fol-
lowing table.
Bosch Rexroth AG R911405731_Edition 02
ctrlX HMI DE0015, DE0021 Multi-Touch
Destruction of screw terminals, insufficient con-
tact and loss of UL/CSA certificiation if no cop-
per wire is used and/or wrong tightening tor-
que.
Mechanic damage due to incorrect mounting
torque.
Displays (Housing Devices)