ctrlX HMI DE0015, DE0021 Multi-Touch
Displays (Housing Devices)
WARNING
The E-STOP button can be used as operating element in an E-STOP circuit.
●
The E-STOP circuit has to be designed by the machine manufacturer.
●
Only qualified staff may connect the E-STOP button and check it afterwards.
●
It has to be connected acc. to the connection scheme
●
connection scheme" on page
The max. load current is 500 mA.
●
9.8.1 Overview
Name at the
Connection
housing
type
CN1
Keypad con-
nection
CN2
Keypad con-
nection
Tab. 9-3: Keypad interfaces
9.8.2 Keypad connection scheme
S1
NOT-HALT
Fig. 9-5: Keypad connection diagram
Death or lethal injury due to incorrect handling
of the E-STOP button
17.
Connector type (integrated)
Phönix pin contact strip,
6-pin, MCV 1,5/6-G-3,5
Phönix pin contact strip,
10-pin, MCV 1,5/10-G-3,5
CN2
S2
S3
chapter 9.8.2 "Keypad
Mating connector or cable (from
outside)
Phönix socket strip,
6-pin, FK-MCP 1,5/6-ST-3,5
Phönix socket strip,
10-pin, FK-MCP 1,5/10-ST-3,5
CN1
S4
R911405731_Edition 02 Bosch Rexroth AG
17/45
Interfaces
LED4
LED2