Changing The Transmission Frequency - Kenwood KDC-PS909 Instruction Manual

Changing the Transmission Frequency

1
To set the frequency change mode
Hold down the REP button for more than three seconds. The
FREQ indicator will light up and the currently set frequency will
be displayed.
F R E Q
NOTE
• The initial value is 88.3MHz.
• If this function is on, the functions other than power on / off,
reset, and modulation level / dynamic control, cannot be
operated.
• This function is not available when the random play, repeat play,
or scan play function is on. Before using this function, cancell
the other functions. This function cannot be used while loading
a disc (while the play indicator is blinking).
2
To change the frequency
Press the 4 or ¢ button on the display unit.
The transmission frequency will change as follows :
87.7MHz 89.9MHz
87.9MHz 89.7MHz
88.1MHz 89.5MHz
88.3MHz (initial value) 89.3MHz
88.5MHz 89.1MHz
88.7MHz 88.9MHz
¢
¢
M H z
To cancell :
Hold down the REP button on the display unit for more than
three seconds.
The FREQ indicator will go off and the frequency change will
take effect.
The frequency change mode is automatically cancelled if you
do nothing for 15 seconds.
— 11 —