Wiring Connection - Kenwood KDC-DAB4551U Instruction Manual

Wiring connection

Antenna Cord
Rear output/ Sub
Woofer output
switchable ("SWITCH
PREOUT" page 7)
DAB antenna input
(SMB) ("DAB ANT
POWER" page 7)
If no connections are made, do not let the wire come out from the
tab.
Connect to the terminal that is grounded when
either the telephone rings or during conversation.
To connect the Kenwood navigation system, consult
your navigation manual.
To use the steering wheel remote control feature,
you need to an exclusive remote adapter (not
supplied) matches your car is required.
Connect either to the power control terminal when
using the optional power amplifier, or to the antenna
control terminal in the vehicle.
Connecting the ISO connectors on some VW/Audi
or Opel (Vauxhall) automobiles
You may need to modify the wiring of the supplied
wiring harness as illustrated below.
Red (Ignition wire)
Unit
Yellow (Battery wire)
Pin Color and function
A4 Yellow
A5 Blue/White
A7 Red
A8 Black
32
English
FM/AM antenna
input (JASO)
L
R
Fuse (10A)
Red (A–7 Pin)
Yellow (A–4 Pin)
Default wiring
Battery
Power control
Ignition (ACC)
Earth (ground) connection
USB connector
AUX input (Stereo)
Use the mini-plug (3.5 mm ø) cable which
is stereo type and does not have any
resistance.
To Kenwood disc changer/ External
optional accessory
(To connect these leads, refer to the
relevant instruction manuals.)
MUTE
REMOTE CONT
STEERING WHEEL
REMOTE INPUT
P.CONT
ANT. CONT
Vehicle
Pin
Purple ª / Purple/black ·
B1 / B2
Gray ª / Gray/black ·
B3 / B4
White ª / White/black ·
B5 / B6
Green ª / Green/black ·
B7 / B8
Wiring
harness D
Brown
(Mute control wire)
Light Blue/Yellow
(Steering remote
control wire)
Blue/White
(Power control/
Antenna control wire)
Yellow (Battery wire)
Red (Ignition wire)
Red (A–7 Pin)
Yellow (A–4 Pin)
Connector A
Connector B
Color and function
Rear speaker (right)
Front speaker (right)
Front speaker (left)
Rear speaker (left)
8 6 4 2
7 5 3 1
8 6 4 2
7 5 3 1