FUXTEC FX-RM Series Original User Manual

FUXTEC FX-RM Series Original User Manual

Petrol lawn mower
Hide thumbs Also See for FX-RM Series:

Advertisement

Original User Manual FUXTEC FX-RM Series_rev15

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FX-RM Series and is the answer not in the manual?

Questions and answers

Peter Abbott
February 24, 2025

How do you replace the drive belt

Subscribe to Our Youtube Channel

Summary of Contents for FUXTEC FX-RM Series

  • Page 1 Original User Manual FUXTEC FX-RM Series_rev15...
  • Page 2 Original User Manual FUXTEC FX-RM Series_rev15 Dear customer, We are pleased with your trust! Please read these instructions for use before the first use and before every use! Here you will find all the information you need for safe use and long service life of the device.
  • Page 3: Table Of Contents

    Original User Manual FUXTEC FX-RM Series_rev15 1. Table of contents Table of contents ................................ 3 Intended use ................................4 Product Specifications ..............................6 Your device at a glance ............................... 8 Preface and preparation ............................10 Description of security symbols ..........................13 General operating and safety instructions.........................
  • Page 4: Intended Use

    Original User Manual FUXTEC FX-RM Series_rev15 2. Intended use The intended use of this device includes  Mowing lawns The device must not – be used in any other way than described in this manual. – be used in commercial applications.
  • Page 5 Original User Manual FUXTEC FX-RM Series_rev15 Emergency Familiarize yourself with the use of the product by reading the user manual thoroughly. Remember the safety instructions and follow them carefully. This will help you to avoid risks and dangers. 1. Always be attentive when using the product so that you can recognize dangers early and react to them.
  • Page 6: Product Specifications

    Original User Manual FUXTEC FX-RM Series_rev15 3. Product Specifications Model type RM4646ECO RM4646 RM5196 RM5196eS RM5196PRO RM4839P RM5396P Engine type OHV 4-stroke OHV 4-stroke OHV 4-stroke OHV 4-stroke OHV 4-stroke OHV 4-stroke OHV 4-stroke Cutting width (mm) Adjustable cutting 25 - 75...
  • Page 7 Original User Manual FUXTEC FX-RM Series_rev15 Model type RM51BS675IS RM51BS500 RM46BS475IS OHV 4-stroke Engine type OHV 4-stroke OHV 4-stroke Cutting width (mm) 25 - 75 Adjustable cutting 21 - 71 25-75 height (mm) Trimmings collection capacity (l) Tank (l) 0.47 Oil capacity (l) 0.47...
  • Page 8: Your Device At A Glance

    Original User Manual FUXTEC FX-RM Series_rev15 4. Your device at a glance Except FX-RM5196eS (see next page) Gear lever Wheel drive Brake lever Starter cable Easy Clean Connection Grass collector Fuel cap Oil dipstick Air filter Height adjustment Side ejection...
  • Page 9 Original User Manual FUXTEC FX-RM Series_rev15 Model FX-RM5196eS Gear lever Wheel drive Brake lever Start button Easy Clean Connection Grass collector Fuel cap Oil dipstick Air filter Height adjustment Side ejection (optionalyl) Exhaust pipe Spark plug...
  • Page 10: Preface And Preparation

    Original User Manual FUXTEC FX-RM Series_rev15 5. Preface and preparation Foreword a) Read the instructions carefully. Familiarize yourself with the operating elements and the proper use of the device. b) Never allow children or other persons who are not familiar with the use of the device to use the mower.
  • Page 11 Original User Manual FUXTEC FX-RM Series_rev15 Safety Instructions a) Do not use the device in an enclosed space where dangerous carbon monoxide can accumulate. b) Mow only in daylight or under good artificial light. c) If possible, avoid using the device in humid conditions.
  • Page 12 Original User Manual FUXTEC FX-RM Series_rev15 s) Stop the engine and remove the spark plug connector from the spark plug: - Before cleaning a blockage or clogged pipes - Before you check, clean, or perform any work on the device.
  • Page 13: Description Of Security Symbols

    Original User Manual FUXTEC FX-RM Series_rev15 Description of security symbols The following icons are found on the device to remind you of the care and warnings that are required. The meaning of the symbols: IMPORTANT : This device could amputate hands and feet and throw objects. Failure to observe the following safety instructions may result in severe injury or even death.
  • Page 14: General Operating And Safety Instructions

    Original User Manual FUXTEC FX-RM Series_rev15 6. General operating and safety instructions - Please read the user manual carefully. Familiarize yourself with the control elements and the proper use of the device. - Never place your hands and feet near the rotating parts of the device. Stay away from the outlet opening at all times - Let only responsible users who are familiar with the operation of the device use this device.
  • Page 15 Original User Manual FUXTEC FX-RM Series_rev15 regulations may limit the age of the user. - WARNING - Gasoline is extremely flammable. - Store gasoline in containers designed for this purpose. - Fill the tank outdoors only. Never smoke while filling the tank.
  • Page 16: Installation / Presettings

    Original User Manual FUXTEC FX-RM Series_rev15 7. Installation / Presettings Read this manual thoroughly and carefully before installing and using your lawnmower. IMPORTANT: The lawnmower is sold WITHOUT OIL OR FUEL. Your new lawnmower has been assembled and tested at the factory.
  • Page 17 Original User Manual FUXTEC FX-RM Series_rev15 Body version 2 (51s models) Remove the lawnmower from the packaging Remove the lower spar (B) from the accessory pack (or main pack) and screw it to the central unit (upper hole) with screws + nuts (2)
  • Page 18 Original User Manual FUXTEC FX-RM Series_rev15 IMPORTANT: on some models, the front wheels are removed to prevent damage to the axle during shipping. The wheels are simply screwed onto the axle with the nuts supplied. ADJUSTING THE CUTTING HEIGHT Raise the wheels for low cutting height and lower the wheels for high cutting height. Adjust the cutting height according to your needs centrally using the height adjustment handle (see illustration on page 2).
  • Page 19 Original User Manual FUXTEC FX-RM Series_rev15 ATTENTION: Fuels mixed with alcohol (called gasohol) or the use of ethanol or methane can attract moisture, causing separation and formation of acid during storage. Acidic gases can damage the engine's fuel system while the device is in storage.
  • Page 20 Original User Manual FUXTEC FX-RM Series_rev15 Mounting the tie bar apparatus Mounting grass catcher bag...
  • Page 21: Starting / Stopping The Engine

    Original User Manual FUXTEC FX-RM Series_rev15 Battery Mount Model FX-RM5196eS Backup Charging port Slide the battery into the holder at the rear end of the motor If necessary, charge the battery using the AC charging connector provided. This should only be necessary if the...
  • Page 22 Original User Manual FUXTEC FX-RM Series_rev15 Stop Release the brake lever to stop the motor. WARNING: The blade will continue to rotate for a few seconds after the engine is turned off. Unplug the spark plug connector when leaving the mower unattended.
  • Page 23: Operating Instructions For The Lawn Mower

    Original User Manual FUXTEC FX-RM Series_rev15 9. Operating instructions for the lawn mower Use of the rear-wheel-drive Push handle Shift lever wheel drive brake lever ATTENTION: The brake lever must be pulled when starting the engine. Release it to stop the engine.
  • Page 24 Original User Manual FUXTEC FX-RM Series_rev15 FlexSpeed drive (RM5196PRO only) The speed control of the FlexSpeed transmission is located on the upper bracket. This option gives you the possibility to adjust the speed of the rear-wheel-drive differently. If you push the lever forward in the direction of the engine, the forward motion slows down. This is especially advisable on uneven terrain.
  • Page 25 Original User Manual FUXTEC FX-RM Series_rev15 Using the grass catcher box Open and hold the rear flap (A), then take the grass catcher bag (B) and hook it in (C) Using the side ejector Open and hold side ejection flap (A). Take side ejector (B) and chop...
  • Page 26: Maintenance And Cleaning (Easy Clean)

    Original User Manual FUXTEC FX-RM Series_rev15 Using the Mulch kit Open and hold rear flap (A), then insert mulch kit (B) into the opening provided. Close rear flap (A) - Ready Note: A mulching blade is already mounted and does NOT need to be mounted additionally.
  • Page 27: Mow And Stow Function (Fx-Rm46Bs475Is Only)

    Original User Manual FUXTEC FX-RM Series_rev15 You can use the EASY CLEAN connection to clean the inner housing (cutting unit). Simply connect a water hose to the connection on the top of the housing and slowly turn on the water while the cutting mechanism is running. The rotation of the cutting mechanism distributes the water evenly in the inner housing and can thus flush away dirt residues.
  • Page 28: Care, Maintenance, And Storage

    2. Disconnect the spark plug cable and keep it away from the spark plug. 3. Empty the oil into a suitable container. Tilt the lawnmower by 45 degrees and use a FUXTEC suction pump to suck off the oil through the filler neck. Alternatively, you can tilt the mower more to drain the oil through the filler neck.
  • Page 29 Original User Manual FUXTEC FX-RM Series_rev15 5. Check the level with the dipstick Spark plug Remove the spark plug and clean it with a wire brush after the engine has cooled down sufficiently. Using a feeler gauge, set the gap to 0.75 mm (0.030").
  • Page 30 Emptying the fuel tank and carburetor Option A (Recommended): Use a FUXTEC suction pump to suck the gasoline out of the tank or let the mower run empty. Option B: 1. Place a manufacturer's recommended gasoline canister under the carburetor and use a funnel to avoid spills. Tilt the lawnmower forward to prevent spillage.
  • Page 31 Original User Manual FUXTEC FX-RM Series_rev15 Maintenance schedule Regular Before each First month or Every 3 months Every 6 months or 50 Once a Every 2 maintenance 5 operating or 25 operating operating hours year or 100 years or hours...
  • Page 32 - Clean the air filter according to the instructions CUSTOMER SERVICE FUXTEC provides original spare parts. We recommend that you take the device to an authorized service center for annual maintenance and inspection of the protective devices. For more information about service and spare parts, please contact FUXTEC Customer Service.
  • Page 33: Warranty

    Original User Manual FUXTEC FX-RM Series_rev15 13. Warranty The warranty period is 24 months from the date of purchase. Please keep your proof of purchase in a safe place. Excluded from the warranty are wearing parts and damage caused by improper use, use of force, technical modifications, use of wrong accessories or non-original spare parts, and repair attempts by non-qualified personnel.
  • Page 34: Spare Parts

    Original User Manual FUXTEC FX-RM Series_rev15 15. Spare parts Spare part Model Item number 4839P BJ2018 10002250 4260449128505 4646,4839P 10002625 4260586991840 4646ECO 10003007 4260586994872 Carburetor FX-RM5196/FX-RM5196PRO/FX-RM5196eS/5396P from FY 10002251 4260449128512 2018 5196/5196PRO/5196eS/5396P 10002614 4260586991802 FX-RM4646,4646ECO,4839P 10002618 4260586991840 Air filter FX-RM5196/FX-RM5196PRO/FX-RM5196eS/5396P...
  • Page 35: Ec Declaration Of Conformity

    Guaranteed sound power level 96dB(A) / 98dB(A) Herrenberg, January 8, 2020 Tim Gumprecht (Managing Partner) Manufacturer: FUXTEC GmbH KAPPSTRASSE 69 71083 HERRENBERG-GÜLTSTEIN GERMANY Storage of the technical documentation: FUXTEC GmbH ● Kappstrasse 69 ● 71083 Herrenberg-Gültstein ● Germany Tim Gumprecht, Managing Partner...
  • Page 36 Original User Manual FUXTEC FX-RM Series_rev15...

Table of Contents

Save PDF