Table of Contents
Advertisement
Parent topic:
Related tasks
Selecting an Image Source
Resetting the Projector
Displaying From a PC Laptop
If you see the "No Signal" message when you display from a PC laptop, you need to set up the laptop to
display on an external monitor.
1. Hold down the laptop's Fn key and press the key labeled with a monitor icon or CRT/LCD. (See your
laptop manual for details.) Wait a few seconds for an image to appear. To display on both the
laptop's monitor and the projector, try pressing the same keys again.
Note: On Windows 7 or later, hold down the Windows key and press P at the same time, then click
Duplicate.
2. If the same image is not displayed by the laptop and projector, check the Windows Display utility to
make sure the external monitor port is enabled and extended desktop mode is disabled. (See your
computer or Windows manual for instructions.)
3. If necessary, check your video card settings and set the multiple display option to Clone, Mirror, or
Duplicate.
Parent topic:
Displaying From a Mac Laptop
If you see the "No Signal" message when you display from a Mac laptop, you need to set up the laptop
for mirrored display. (See your laptop manual for details.)
1. Open the System Preferences utility and select Displays, Display, or Color LCD.
2. Click the Arrange or Arrangement tab.
3. Select the Mirror Displays checkbox.
Parent topic:
Solutions When the Image is Not Rectangular
If the projected image is not evenly rectangular, try the following solutions:
• Press the
• Place the projector directly in front of the center of the screen, facing it squarely, if possible.
Solving Image or Sound Problems
Solutions When "No Signal" Message Appears
Solutions When "No Signal" Message Appears
Auto Keystone button on the remote control to automatically adjust the image shape.
85
Advertisement
Table of Contents
